Installation kit 90º angle connectors, reducer hose connector 12 x 10 mm
Regular price:
€159.00
Available, delivery time: 1-3 Werktage
Product number:
935-310
Installation kit 90º angle connectors, reducer hose connector 12 x 10 mm
bluuwater Installation Kit 90º Angle Connections, Reducer Hose Connector 12 x 10 mm for Caravans, Motorhomes, and Boats
Technical Data:
Water filtration through hollow fiber membranes (UF ultrafiltration)
Installation: between water tank and extraction points
For hose diameter: 10 mm internal
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (calendar app or Timestrip)
Use as a pre-filter: Filling filter set required
Disposal via household waste - no contact with bacteria
Scope of Delivery
1 piece - Water filter CR08 (with TimeStrip and user manual as PDF for download)
1 piece - Holder (filter mounting)
1 piece - Dummy line with sealing rings (operation without filter, idle time or frost)
2 pieces - Click & Ready quick couplings with 90º angle
6 pieces - Stepless ear clamps 13.5 - 16 mm
2 pieces - Cable ties (depending on the mounting possibility of the holder: cable ties or wood screws)
4 pieces - Wood screws 3 x 16 mm (depending on the mounting possibility of the holder: cable ties or wood screws)
2 pieces of stickers for flow direction
2 pieces Reducer hose connectors 12 to 10 mm straight, DVGW W270 / KTW A (for drinking water)
2 pieces (each approx. 4 cm long) drinking water hose 10 mm
Enjoy filtered water anytime - no matter which vehicle or model! The bluuwater water filter impresses with its compact design and powerful filtration.
Retention of bacterial germs such as Legionella, Escherichia Coli, pseudomonads with a retention rate of >99.99999%
* Tested by an accredited medical device laboratory
Technical Data:
Water filtration through hollow fiber membranes (UF ultrafiltration)
Installation: between water tank and extraction points
For hose diameter: 10 mm internal
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (calendar app or Timestrip)
Use as a pre-filter: Filling filter set required
Disposal via household waste - no contact with bacteria
Scope of Delivery
1 piece - Water filter CR08 (with TimeStrip and user manual as PDF for download)
1 piece - Holder (filter mounting)
1 piece - Dummy line with sealing rings (operation without filter, idle time or frost)
2 pieces - Click & Ready quick couplings with 90º angle
6 pieces - Stepless ear clamps 13.5 - 16 mm
2 pieces - Cable ties (depending on the mounting possibility of the holder: cable ties or wood screws)
4 pieces - Wood screws 3 x 16 mm (depending on the mounting possibility of the holder: cable ties or wood screws)
2 pieces of stickers for flow direction
2 pieces Reducer hose connectors 12 to 10 mm straight, DVGW W270 / KTW A (for drinking water)
2 pieces (each approx. 4 cm long) drinking water hose 10 mm
Enjoy filtered water anytime - no matter which vehicle or model! The bluuwater water filter impresses with its compact design and powerful filtration.
Retention of bacterial germs such as Legionella, Escherichia Coli, pseudomonads with a retention rate of >99.99999%
* Tested by an accredited medical device laboratory
PRODUCT SAFETY / GPSR
Brand: bluuwaterThe responsible manufacturer and economic operator in the EU / Germany for this product is:
bluuwater GmbH
Gewerbering Süd 2
97359 Schwarzach am Main Germany
Phone +49 (0)8284 9289692
kontakt@bluuwater.de
The responsible manufacturer and economic operator can be found on each product, packaging or enclosed instructions
ril.LegalGuarantee