Installation kit straight connectors, Barwig submersible pump
Regular price:
€199.00
Available in 30 days, delivery time 6 Wochen
Product number:
935-350
Installation kit straight connectors, Barwig submersible pump
bluuwater Installation Set straight connections, Barwig Submersible Pump for Caravans, Motorhomes, and Boats
Technical Data:
Water filtration through hollow fiber membrane (UF Ultrafiltration)
Installation: between water tank and extraction points
For hose diameter: 10 mm inside
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (Calendar App or Timestrip)
Use as pre-filter: Filling filter set required
Disposal in general waste - no contact with bacteria
Technical Data:
Water filtration through hollow fiber membrane (UF Ultrafiltration)
Installation: between water tank and extraction points
For hose diameter: 10 mm inside
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (Calendar App or Timestrip)
Use as pre-filter: Filling filter set required
Disposal in general waste - no contact with bacteria
Barwig High-Performance Submersible Pump 12 Volts - 22 l/min - 1.4 Bar
Barwig Low-Voltage Submersible Pump Type 088 - without check valve
With automatic venting function, dry-run protection, and dirt sieve.
Only suitable for drinking water systems in camping vehicles.
Not suitable for continuous operation.
Installation diameter 80 mm.
Technical Data:
Dimensions: 132 x 78 x 55 mm
Model: High-performance submersible pump Type 088
Hose connection Ø 10 mm
Length of spout: 4.0 cm
Voltage: 12 Volts Current: max. 3.7 - 4.2 A
Flow rate: max. 22 l/min.
Pressure: max. 1.4 bar
Weight: approx. 290 g
Cable length: 1 m
Barwig Low-Voltage Submersible Pump Type 088 - without check valve
With automatic venting function, dry-run protection, and dirt sieve.
Only suitable for drinking water systems in camping vehicles.
Not suitable for continuous operation.
Installation diameter 80 mm.
Technical Data:
Dimensions: 132 x 78 x 55 mm
Model: High-performance submersible pump Type 088
Hose connection Ø 10 mm
Length of spout: 4.0 cm
Voltage: 12 Volts Current: max. 3.7 - 4.2 A
Flow rate: max. 22 l/min.
Pressure: max. 1.4 bar
Weight: approx. 290 g
Cable length: 1 m
Scope of delivery
1 piece - Water filter CR08 (with TimeStrip and instructions for use as PDF for download)
1 piece - Holder (filter mounting)
1 piece - Dummy line with sealing rings (operation without filter, idle time, or frost)
2 pieces - Click & Ready quick couplings straight
2 pieces - Stepless ear clamps 13.5 - 16 mm
2 pieces - Cable ties (depending on the mounting option of the holder: cable ties or wood screws)
4 pieces - Wood screws 3 x 16 mm (depending on the mounting option of the holder: cable ties or wood screws)
2 pieces of stickers for flow direction
1 piece Barwig Low-Voltage Submersible Pump Type 088 - without check valve
Enjoy filtered water anytime – no matter which vehicle or model! The bluuwater water filter impresses with its compact design and powerful filtration.
Retention of bacterial germs such as Legionella, Escherichia Coli, Pseudomonas with a retention rate of >99.99999%
* Tested by an accredited laboratory for medical devices
PRODUCT SAFETY / GPSR
Brand: bluuwaterThe responsible party for this product is the EU/Germany-based manufacturer and economic operator:
bluuwater GmbH
Gewerbering Süd 2
97359 Schwarzach am Main Germany
Phone +49 (0)8284 9289692
kontakt@bluuwater.de
Brand Barwig
Barwig Water Supply
An der Fliede 5
34385 Bad Karlshafen
Germany
barwig@barwig-wv.de
Barwig Water Supply
An der Fliede 5
34385 Bad Karlshafen
Germany
barwig@barwig-wv.de
The responsible manufacturer and economic operator can be found on every product, packaging, or enclosed instructions
ril.LegalGuarantee