Installation kit straight connectors, reducer hose connector 12 x 10 mm
Product number:
935-08-12.2
Installation kit straight connectors, reducer hose connector 12 x 10 mm
bluuwater installation set straight connections, reducing hose connector 12 x 10 mm for caravans, motorhomes, and boats
Technical Data:
Water filtration through hollow fiber membranes (UF ultrafiltration)
Installation: between water tank and points of withdrawal
For hose diameter: 10 mm inner
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (calendar app or Timestrip)
Use as a pre-filter: Filling filter set required
Disposal via household waste - no contact with bacteria
Scope of delivery
1 piece - Water filter CR08 (with TimeStrip and user manual as PDF for download)
1 piece - Holder (filter mounting)
1 piece - Dummy line with sealing rings (operation without filter, idle time or frost)
2 pieces - Click & Ready quick couplings straight
6 pieces - Stepless ear clamps 13.5 - 16 mm
2 pieces - Cable ties (depending on holder mounting options: cable tie or wood screws)
4 pieces - Wood screws 3 x 16 mm (depending on holder mounting options: cable tie or wood screws)
2 pieces stickers for flow direction
2 pieces Reducing hose connectors 12 to 10 mm straight, DVGW W270 / KTW A (for drinking water)
2 pieces (each approx. 4 cm long) drinking water hose 10 mm
Enjoy filtered water at any time – no matter in which vehicle or model! The bluuwater water filter impresses with its compact design and powerful filtration.
Retention of bacterial germs such as Legionella, Escherichia Coli, Pseudomonads with a retention rate of >99.99999%
* Tested by an accredited laboratory for medical devices
Technical Data:
Water filtration through hollow fiber membranes (UF ultrafiltration)
Installation: between water tank and points of withdrawal
For hose diameter: 10 mm inner
Filter size: 200 mm length, 55 mm diameter
Flow rate: 300 liters per hour
Recommended pressure range: 1.5 to 5 bar
Replacement interval: After 6,000 liters or 6 months (calendar app or Timestrip)
Use as a pre-filter: Filling filter set required
Disposal via household waste - no contact with bacteria
Scope of delivery
1 piece - Water filter CR08 (with TimeStrip and user manual as PDF for download)
1 piece - Holder (filter mounting)
1 piece - Dummy line with sealing rings (operation without filter, idle time or frost)
2 pieces - Click & Ready quick couplings straight
6 pieces - Stepless ear clamps 13.5 - 16 mm
2 pieces - Cable ties (depending on holder mounting options: cable tie or wood screws)
4 pieces - Wood screws 3 x 16 mm (depending on holder mounting options: cable tie or wood screws)
2 pieces stickers for flow direction
2 pieces Reducing hose connectors 12 to 10 mm straight, DVGW W270 / KTW A (for drinking water)
2 pieces (each approx. 4 cm long) drinking water hose 10 mm
Enjoy filtered water at any time – no matter in which vehicle or model! The bluuwater water filter impresses with its compact design and powerful filtration.
Retention of bacterial germs such as Legionella, Escherichia Coli, Pseudomonads with a retention rate of >99.99999%
* Tested by an accredited laboratory for medical devices
PRODUCT SAFETY / GPSR
Brand: bluuwaterResponsible for this product is the manufacturer and economic operator based in the EU/Germany:
bluuwater GmbH
Gewerbering Süd 2
97359 Schwarzach am Main Germany
Phone +49 (0)8284 9289692
kontakt@bluuwater.de
The responsible manufacturer and economic operator can be found on each product, packaging or accompanying instructions